University of Nebraska Extension - Holt/Boyd News Column for the Week of February 4, 2024

LaDonna Werth, Extension Educator Phone: 402-336-2760 E-mail: LWerth2@unl.edu

Help Children Develop a Sense of Responsibility

Children need to develop a sense of responsibility to be prepared for adult living. Teaching responsibility can begin when they are young and is one of the best values for children to possess.

Cooperating with and helping others can be an important way for children to learn responsibility. Parents can help children develop and improve their cooperative attitudes by giving them tasks that are challenging, satisfying and appropriate for their level of development. Children benefit when they feel that they are doing a real job and making a contribution to the family.

Regular family meetings are also valuable learning experiences, teaching children about decision making and cooperation. These meetings give family members an opportunity to discuss and work on issues, and to plan events or outings together.

Here are some tips that can help children learn to assume responsibility:

• Give children clear and positive instructions for doing the task and plenty of time to complete it.
• Avoid doing things for your children that they can do for themselves. Children must learn from their experiences through trial and error, and by taking the time to figure it out. Let children assume responsibility and accept their standards.
• Ask children instead of ordering. Demanding or forcing children to do tasks is not the way to help them develop responsibility. Children will be willing to help out when they feel they are needed and are made to feel they can do the job.
• Use consequences. It is important that parents explain what the consequences will be for breaking a limit, which will help children develop a sense of accountability for their actions.
• Be a good role model. Children are learning by watching and imitating what they see their parents do. Parents need to model appropriate behaviors, such as keeping promises, sharing, cooperating, helping, taking care of their belongings and being responsible.

Resources:

Hamilton, A. 2006. Teaching Children Self-Control and Self-Responsibility: Parenting 101. University of New Hampshire Cooperative Extension.

Tucker, B. 1998. Building Responsibility. University of Arizona Cooperative Extension

Source: Nina Chen - Ph.D., CFLE, former Human Development Specialist, Jackson County, University of Missouri Extension (University of Missouri Extension - February 2018)

Proper Time to Prune Shrubs

An important aspect of pruning is knowing when to prune plants.  Proper timing helps to ensure attractive, healthy, productive plants. The proper time to prune shrubs in Nebraska is described below.

Deciduous Shrubs

The proper time to prune deciduous shrubs is determined by the plant's growth habit, bloom time, and health or condition.

Spring-Flowering Shrubs

Spring-flowering shrubs, such as lilac and forsythia, bloom in spring on the growth of the previous season. The plant's health or condition determines the best time to prune spring-flowering shrubs.

The best time to prune healthy, well-maintained spring-flowering shrubs is immediately after flowering. Healthy, well-maintained shrubs should require only light to moderate pruning. Pruning immediately after flowering allows gardeners to enjoy the spring flower display and provides adequate time for the shrubs to initiate new flower buds for next season.

Summer-Flowering Shrubs

Summer-flowering shrubs, such as potentilla and Japanese spirea, bloom in summer on the current year's growth.  Prune summer-flowering shrubs in late winter or early spring.  The pruned shrubs will bloom in summer on the current season's growth.

Shrubs with Non-Showy Flowers

Some deciduous shrubs don't produce attractive flowers, such as burning bush.  These shrubs may possess colorful bark, fruit, or foliage. Prune these shrubs in late winter or early spring before growth begins.

Overgrown Shrubs

Neglected, overgrown shrubs often require extensive pruning to rejuvenate or renew the plants. The best time to rejuvenate large, overgrown shrubs is late winter or early spring (March or early April). Heavy pruning in late winter or early spring will reduce or eliminate the flower display on spring-flowering shrubs for 2 or 3 years. However, rejuvenation pruning will restore the health of the shrubs.

Evergreen Shrubs

Prune evergreen shrubs, such as juniper and yew, in late March or early April before new growth begins. Light pruning may also be done in mid-summer.  Avoid pruning evergreen shrubs in the fall. Fall-pruned evergreens are more susceptible to winter injury.

Source: Aaron Steil – Iowa State University Consumer Horticulture Extension Specialist (Yard and Garden – April 2023)

Tips For Dealing with Wet, Muddy Winter Conditions in Cattle Feedyards

In unexpected warm, wet winter conditions cattle face challenges accessing feed, water, or a place to lie down. Muddy conditions affect requirements for maintenance, according to a UNL study

Even if feed intake is not affected by muddy conditions (cattle can reach the bunk and water trough and consume a full ration daily), mud depths of less than 9 inches increase maintenance requirements up to 80%. This means that cattle consuming a finishing diet containing 1 Mcal NEm/lb will require nearly double the amount of feed to meet their maintenance requirements or 19 lb for a 1,400-lb steer. In many cases, intake is affected by muddy conditions and 19 lb may not be achievable, leading cattle to lose weight.

That's why it's important to reduce the effects of mud and standing water in pens as soon as possible. Inherently, pen conditions are dictated by siting, orientation, fence type, and percentage of solid surfacing around bunks, water tanks, access points and loafing areas.

Therefore, strategies to reduce the effect of mud and standing water on cattle performance are listed below for worst to best pen conditions:

Suggestions For Worst Pen Sites

(Flat, heavily stocked or with standing water and/or with less than 1/3 of the pen are as solid surfacing):

• Remove lightweight cattle to pastures or corn stalk fields stocking at a rate of 1 acre per head on hilly ground or 2 or more acres per head on flat ground.
• On pens made available by this strategy, scrape solid surfacing to the bare material (concrete or bituminous) and bed heavily before permitting access to heavier or newly received cattle housed yet in adjacent pens (continue to feed only the home pen).
• If this is not possible, simply lay whole round bales of bedding or even hay on areas with less mud. Cattle will work the material off, using it for bedding and feed. Continue this strategy until weather conditions improve.

Suggestions For Average Pen Sites

(With some slopes for loafing areas, stocked lighter and/or more than 1/3 of the pen are as solid surfacing)

• All aprons and surfaced areas, scrape down to the surface. This is a minimum to let cattle find a spot to lie down.
• Aprons need to be scraped two to four times weekly. On wide aprons (over 20'), lay bedding down heavily after scraping in areas beyond the first 20’ behind the bunk.
• If forming a bed pack, only bed when pack begins to seep. Dry or sticky packs are still functional as bedding.
• Scrape any scattered (not heavily wet) bedding onto bed pile. Bed on top of it.

To make additional "emergency" hard surfaces (applicable to both pen conditions described above):

• Potential areas to enhance surfacing: behind bunk or water tank aprons or on top of mounds if accessible (don't attempt to build a hard surface on hillsides unless machinery can safely drive over it).
• Alternatively, consider ground-cover mats like this or this used to move heavy construction equipment over a ground surface. Make sure this “path” is in place before attempting to improve a site within the pen.
• Scrape down below surface line about 1', attempting to remove excess accumulated manure and mud.
• Lay down recycled concrete to the depth of 6". Bed heavily on top of this. A 25' by 25' area filled to a 6" depth will need 16 ton of recycled concrete (one short truck load; about $500 for concrete).
• Alternatively, one might consider using railroad ties to create the base. About $30 each at retail price. 
• Dimensions are 8' x 7" x 9", so a 48' x 3' surface made from ties would require 24 ties or $720.
• A square design is recommended for recycled concrete (to prevent excess scattering), while a long rectangle shape is recommended when forming a base with ties to keep them tucked together in a narrow path.
• Bed any emergency surfaced areas generously. The prorated rate of bedding to achieve a working bed pack is 4 lb per head daily or more. Any bedded areas must be rebedded regularly, particularly on areas with no surfacing. Lapses in bedding will create worse conditions even on surfaced areas.
• Areas where recycled concrete is laid should be managed separately when cleaning manure from pens. They can be left installed permanently and managed as an extension of the apron (recycled concrete tends to “set” together with traffic and moisture) or power washed and surfaced with concrete when weather improves.
• Ties can be lifted when weather improves (and before extending the area using concrete) and be used for other purposes.

Note: these are emergency recommendations to improve pen conditions rapidly and are not tested by scientific procedures. In the example dimensions provided above, and assuming 24 ft² are needed to fit one animal, no more than 25 head will be able to access this area at one time at a cost of between $500 to $1,000.

Yet, considering the value gain resulting from fed cattle prices increase since the beginning of the year results in a $75 increase in value per head. Investments at or below this level to preserve the performance and life of a $2,700 animal are well advised.