Small Engines
Department H - Section 890
Premium Schedule B
►ALL STATIC EXHIBITS MUST HAVE RECEIVED A PURPLE RIBBON AT THE COUNTY FAIR TO ADVANCE TO THE STATE FAIR.
GENERAL INFORMATION
The name and county of each exhibitor should appear separately on the back of each board, poster or article and on the front cover of the notebooks so owner of exhibit may be identified if the entry tag is separated from the exhibit.
Demonstration boards should be sanded and finished to improve their appearance. The finish on a demonstration board will be judged as a woodworking exhibit.
Reports should be written using the scientific method whenever possible (Background, the Question or hypothesis, what you plan to do and what you did, Method used and observations, Results: what you learned.) All reports should be computer generated and enclosed in a clear plastic cover. The reports should be attached securely to the display.
Please refer to the General Rules for the policy regarding firearms, items with a blade, and other related items.
Please refer to the General Rules for the policy regarding use of copywritten images.
Team Entries To qualify for entry at the Nebraska State Fair team exhibit the exhibit and all supporting information must clearly be the work of a team instead of an individual, and must have at least 50% of all team members enrolled in 4-H. Additionally, all enrolled 4-H members on the team should complete and attach an entry tag to the materials. A supplemental page documenting the individual contributions to the project should be included. The entry will be judged as a team, with all team members receiving the same ribbon placing.
Posters in this department can by any size up to 28 inches x 22 inches when ready for display. Example: trifold poster boards are not 28 inches x 22 inches when full open for display.
Several classes require a display board which should be a height of 24 inches and not to exceed 1/4” thickness. A height of 24 7/8 inches is acceptable to allow for the saw kerf (width) if two 24 inches boards are cut from one end of a 4 foot by 8 foot sheet of plywood. Nothing should be mounted within 3/4” of the top or bottom of the board. (Example: Woodworking & Electricity.)
- Fabricated board such as plywood, composition board, or particle-type lumber may be used for demonstration displays.
- Demonstration boards should be sanded and finished to improve their appearance. The finish on a demonstration board will be judged as a woodworking exhibit.
- Demonstration boards should include an overall title for the display plus other necessary labeling.
- Reports should be written using the scientific method whenever possible (Background, the Question or hypothesis, what you plan to do and what you did, Method used and observations, Results: what you learned.) All reports should be computer generated and enclosed in a clear plastic cover. The reports should be attached securely to the display.
Scoresheets, forms, contest study materials, and additional resources can be found at https://go.unl.edu/ne4hstem
CRANK IT UP! - UNIT 1
901 Small Engine Display/Item - Show an application of one of the concepts learned in the Unit 1 project. Examples include: identify the parts of a small engine, safety rules for starting a small engine, small engine repair tool identification.
WARM IT UP – UNIT 2
902. Small Engine Display/Item - Show an application of one of the concepts learned in the Warm It Up project. Examples include: comparison of engine oil types, transmissions, or safety related to engines. Exhibit could be a poster display, or an actual item.
TUNE IT UP – UNIT 3
903. Engine Display/Item - Display/Item should exemplify one of the lessons learned in the Tune It Up Project. Examples include: diagnostic tools, fuel systems, ignition systems. If a complete engine is exhibited it will not be started. However, display needs to report process of building/rebuilding engine and how/where engine will be utilized (i.e. lawn mower, weed eater, snow blower, etc.).