FFA - INDUSTRIAL ARTS
DIVISION 550 - DISPLAY BOARDS
A display board shall be items completed by FFA members between the close of the last state fair and the end of school prior to the current county fair.
Each display board shall be 18” x 24” x 3/8”.
Welding Boards shall identify: 1) kind of weld; 2) position of weld; 3) amperage; 4) electrode size; 5) AWS number; and 6) thickness or dimension of metal. Minimum of 8, and maximum of 10, welds per board. Welds shall be attached so all sides are available for evaluation. Judges will deduct points if welds are mounted solid. No specific welds are required; however, welds must differ from one another by at least position, electrode size, AWS number, thickness or dimension of metal, or kind of weld.
5500 ARC
5501 MIG/TIG
5502 GAS WELDING/BRAZING
5503 ELECTRICAL - Must include at least 1 switch, 2 types of splices, 1 light fixture or receptacle.
5504 PLUMBING - Must use 3 types of pipe (copper, plastic & steel); soldering, flare fitting, glued joint, and a steel threaded joint are required.
5505 ADVANCED ELECTRICAL OR PLUMBING - Contains controls, valves, timers, motors, etc.
REQUIREMENTS
Household/industrial arts items are eligible to exhibit; for example, gun racks, desks, magazine racks, computer table, etc.
Items that appear to be craft items or industrial technology will not be permitted to show as a FFA exhibit; show management has decision-making authority in this area.
Industrial Arts Items will not be allowed to exhibit at the state fair.
No craft items.
PREMIUMS: Purple-$3.00; Blue-$2.00; Red-$1.50; White-$1.00
DIVISION 560 - INDUSTRIAL ARTS
5600 LARGE ITEMS - Cabinets, chests, etc.
5601 SMALL ITEMS - Stools, shelves, etc.