RULES
- The name and county of each 4-H member should appear separately on the back of each board, poster or article and on the front cover of the notebooks so owner of the exhibit may be identified if the entry tag is separated from the exhibit.
- All welds exhibited in class 1 or 2 must be mounted on a 12 inches high x 15 inches long display board of thickness not to exceed 3/8 inch. Attach each weld on a wire loop hinge or equivalent, so the judge can look at the bottom side of the weld when necessary. Each weld should be labeled with information stated 1) type of welding process (stick, MIG, TIG, OxyAcetylene, etc.) 2) kind of weld, 3) welder setting, 4) electrode/wire/rod size, and 5) electrode/wire/rod ID numbers. Attach a wire to display board so it can be hung like a picture frame. No picture frame hangers accepted.
- Fabricated board such as plywood, composition board, or particle-type lumber may be used for demonstration displays.
- Demonstration boards should be sanded and finished to improve their appearance. The finish on a demonstration board will be judged as a woodworking exhibit.
- Reports should be written using the scientific method whenever possible (Background, the Question or hypothesis, what you plan to do and what you did, Method used and observations, Results: what you learned. All reports should be computer generated and enclosed in a clear plastic cover. The reports should be attached securely to the display.
- If no plans are included with welding art, welding article, welding furniture or composite weld project item will be disqualified.
All outside projects MUST have supporting information placed in a protective bag to prevent damage from weather events such as rain and be ATTACHED to the projects with string, zip ties. Etc.
ARCS & SPARKS
- All welds exhibited in class 1 or 2 must be mounted on a 12 inches high x 15 inches long display board of thickness not to exceed 3/8 inch.
- Attach each weld on a wire loop hinge or equivalent, so the judge can look at the bottom side of the weld when necessary.
- Each weld should be labeled with information stated: 1. Type of welding process (stick, MIG, TIG, Oxy-Acetylene, etc.) 2. Kind of weld 3. Welder setting 4. Electrode/wire/rod size 5. Electrode/wire/rod ID numbers
- Attach a wire to display board so it can be hung like a picture frame. No picture frame hangers accepted.
If no plans are included with welding article or welding furniture, item will be disqualified.
*H920001 - Welding Joints – (SF281) - a display of one butt, one lap and one fillet weld.
- All welds should be made with the same electrode/wire/rod size and number.
- Welds should be made only on one side of metal so penetration can be judged.
- Welds should be cleaned with chipping hammer and wire brush. Apply a coat of light oil (penetrating oil) to the metal to prevent rusting. Wipe off excess oil.
- It is suggested that all welds be of the same size and thickness of metal. These pieces, referred to as coupons, should be 1.5 to 2 inches wide and 3.5 to 4 inches long. A good way to get this size is to buy new cold rolled strap iron and cut to length. The extra width is needed to provide enough metal to absorb the heat from the welding process and prevent the coupons from becoming too hot before the bead is completed. Narrower coupons will become very hot, making an average welder setting too cold at the bead start, just about right in the middle, and too hot at the end. The correct way to weld narrow strips is to make short beads and allow time to cool, however this project requires a full-length bead.
- Stick welding: Suggested coupon thickness -1/4 inch if using 1/8 inch rod. Suggested rod - AC and DC straight or reverse polarity - first E-7014, second E-6013 o MIG welding: Suggested coupon thickness - ¼ inch if using .035 wire and 1/8 inch if using .023 wire
- Oxy-Acetylene: Suggested coupon thickness - 1/8 inch. Suggested rod–1/8 inch mild steel rod
*H920002 - Position Welds – (SF281) - a display showing three beads welded in the vertical down, horizontal, and overhead positions. It is suggested that all welds be of the same size and thickness of metal. These pieces are referred to as coupons. The welds can be on one coupon that is about 4 inches x 4 inches or on individual coupons that are about 2 inches x 4 inches inch and ¼ inch thick. Suggested rods for this class of position welds for AC and DC straight or reverse polarity is, first E-6013, second E-7014 and E-6010 for DC reverse polarity only. Welds should be cleaned with a chipping hammer and wire brush. Apply a coat of light oil (penetrating oil) to the metal to prevent rusting. Wipe off excess oil.
*H930003 - Welding Art – (SF283) -any art created using tack welds to hold the metal pieces together (examples include horseshoe projects). Type of welder, welder settings, all plants, plan alternations, and a bill for material must be attached to the article. Protect plans with a cover. If project is designed to be outside, it is required to have appropriate outdoor finish.
*H920004 - Welding Article – (SF282) - any shop article where welding is used in the construction. 60% of the item must be completed by 4-H’er and notes regarding laser welding or machine welding must be included. Type of welder, welder settings, all plans, plan alternations, and a bill for material must be attached to the article. Protect plans with a cover. If project is designed to be outside, it is required to have appropriate outdoor finish because you project may be displayed outside.
*H920005 - Welding Furniture – (SF282) - any furniture with 75% welding is used in the construction. 60% of item must be completed by 4-H’er and notes regarding laser welding or machine welding must be included. Type of welder, welder settings, all plans, plan alternations, and a bill for material must be attached to the article. Protect plans with a cover. May be displayed outside. If project is designed to be outside, it is required to have appropriate outdoor finish because your project may be displayed outside.
*H920006 - Plasma Cutter/Welder Design – (SF279) - Plasma cutters/welders allowed for detailed design(s) to butt cut into metal. 4-H’ers will create a notebook describing the design process to create the “artwork” to butt cut into the metal. This item is not eligible for entry at the State Fair. In the notebook include: 1. A photo (front and back) of the finished project. 2. Instructions on how the design was created (include software used), this allows for replication of the project 3. Lessons learned or improvements to the project 4. Steps to finish the project.
*H920007 - Composite Weld Project – (SF282)-60% of the project must be welded and 40% made from other materials such as wood, rubber, etc. Type of welder, welder settings, all plans, plan alternations, and a bill for material must be attached to the article. Protect plans with a cover. If project is designed to be outside it is required to have appropriate outdoor finish because the project may be displayed outside.